|
|
Post by thedirtydutchman on Jun 7, 2014 20:11:29 GMT -5
Hello all! Its been quite some time! I sold the water pumper warrior buggy due to the fact that it was, well, garbage. But now im back with an air cooled rail  I get some pics up as soon as I remember how!  |
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Jun 8, 2014 7:03:49 GMT -5
Nice lookin Buggy!! no go change ur signature line  |
|
|
|
Post by thedirtydutchman on Jun 8, 2014 7:54:05 GMT -5
Lol, thanks! Should be correct now |
|
Deleted
Posts: 0
Joined: Nov 22, 2024 20:53:10 GMT -5
|
Post by Deleted on Jun 8, 2014 14:39:18 GMT -5
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Jun 9, 2014 6:52:53 GMT -5
|
|
|
|
Post by thedirtydutchman on Jun 9, 2014 7:19:01 GMT -5
I do believe I have the oil to full. Its smoking on start up since I changed it. Where does everyone usually run the oil level?
|
|
|
|
Post by 81pumagtc on Jun 9, 2014 8:46:29 GMT -5
I usually fill it by volume the first time, run it a minute, and check the dipstick to see what the oil level is. I have found a lot of mis-marked dipsticks through the years...
Filling by volume is the best way to do it the first time.
Dave Riedle
|
|
|
|
Post by thedirtydutchman on Jun 9, 2014 10:14:59 GMT -5
I filled it so it was on the upper line. It seems to run fine and the oil pressure is ok. But now it smokes on a cold start. Didn't do that before I changed it. I used castrol 20w50 in it. Thats what I read was a good choice.
|
|
|
|
Post by thedirtydutchman on Jun 14, 2014 21:08:31 GMT -5
|
|
|
|
Post by thedirtydutchman on Jun 15, 2014 16:08:21 GMT -5
Ready for its new heart!  |
|
|
|
Post by thedirtydutchman on Jun 16, 2014 20:53:12 GMT -5
|
|
|
|
Post by 81pumagtc on Jun 17, 2014 0:48:09 GMT -5
Looks great!
Dave Riedle
|
|
|
|
Post by thedirtydutchman on Jun 17, 2014 6:35:00 GMT -5
Thanks! Cant wait to drive it again
|
|
|
|
Post by thedirtydutchman on Jun 18, 2014 18:09:11 GMT -5
Why do my alternator and crank pullys not line up??? Not as off as I thought. Still not perfect though. It does run! The belt stayed on when I fired it. Is that ok? Do all of these things "tick" slightly? Sounds the same as the old motor
|
|
|
|
Post by bren on Jun 18, 2014 18:44:11 GMT -5
Do you have a sand sealed pulley on the motor? If so you should have a spacer in the alternator to line it all up.
|
|
I get some pics up as soon as I remember how! 
