67type1
1600dp
Remembering the past.... liv'n the Dream
Posts: 666
Joined: Mar 18, 2011 19:05:44 GMT -5
|
Post by 67type1 on Nov 4, 2012 13:19:37 GMT -5
Thought I'd see if there's interest in getting together for a Tech Session. Let me know which date(s) work for you.
January 12th or 19th, 2013
As in the past; you don't need to bring something to work on. If you do; please let us know.
Got a brake job in mind or just need the drums turned; bring them along.
Need to high speed balance your tires? Even the 5x205's?, you'll be an expert in 5 minutes.
Let me know if you have any questions.
Thanks
|
|
|
|
Post by dubfreak1 on Nov 4, 2012 19:01:02 GMT -5
Thanks Ray! Either day would be great for me.
How about turning some rear drums for the 67 drag car?
|
|
|
|
Post by dunedudex4 on Nov 4, 2012 19:45:40 GMT -5
HHHMMM Floor pan replacement?? Thanks Dave T
|
|
Dunn Fabrication ( VDub63 )
40hp
Steven A.k.a Vdub63 "Your project isn't finished until it is DUNN"
Posts: 50 
Joined: Jul 6, 2012 22:11:43 GMT -5
|
Post by Dunn Fabrication ( VDub63 ) on Nov 4, 2012 20:11:48 GMT -5
HHHMMM Floor pan replacement?? Thanks Dave T Sounds like a plan to me. |
|
67type1
1600dp
Remembering the past.... liv'n the Dream
Posts: 666
Joined: Mar 18, 2011 19:05:44 GMT -5
|
Post by 67type1 on Nov 5, 2012 4:27:04 GMT -5
We'll wait til the end of the month and see which date works the best for most.
Dave, sounds like Steven can help us out. Floor pans will be a good project. I'm sure we can get done in one day (I don't have room to store vehicles). Is the body on the pan?
Steven, Thanks for your expertise & help
Rudy, no problem turning the drums.
Anyone else? No need to bring anything, but if you got something in mind; let us know.
|
|
Ruffuss
1600dp
Posts: 2,795
Joined: Jun 25, 2008 19:13:16 GMT -5
|
Post by Ruffuss on Nov 5, 2012 8:14:12 GMT -5
Ray, it's get it Dunn in one day!
|
|
|
|
Post by dunedudex4 on Nov 11, 2012 18:36:52 GMT -5
The body could be off of the car. Looking into getting a title for the 74 frame. Thanks Dave T
|
|
67type1
1600dp
Remembering the past.... liv'n the Dream
Posts: 666
Joined: Mar 18, 2011 19:05:44 GMT -5
|
Post by 67type1 on Dec 10, 2012 8:03:19 GMT -5
Let's go with Jan. 19th. Start at noon, and finish up around 8pm.
No need to bring anything to work on, but please let me know if you're coming and what you might be working on.
PM me if you need the address or directions.
Looking forward to this. Hope you can make.
|
|
Dunn Fabrication ( VDub63 )
40hp
Steven A.k.a Vdub63 "Your project isn't finished until it is DUNN"
Posts: 50
Joined: Jul 6, 2012 22:11:43 GMT -5
|
Post by Dunn Fabrication ( VDub63 ) on Dec 25, 2012 9:39:19 GMT -5
I'm ready for this. Any one else?
|
|
BeetleBob
1500sp
Old GearHead
Posts: 161
Joined: May 26, 2011 8:46:42 GMT -5
|
Post by BeetleBob on Dec 25, 2012 12:13:08 GMT -5
Wish I could be there, but will be going to Detroit on the 19th.
Hope everyone has a great time. That is what has happened in the past for me. ( Thanks Ray)
MERRY CHRISTMAS to ALL!
|
|
dansam
1600dp
Posts: 2,434
Joined: Oct 25, 2008 7:23:39 GMT -5
|
Post by dansam on Dec 25, 2012 12:42:08 GMT -5
Working  Woulda been a cool one too. |
|
vwrick69
1600dp
The difference between Genius and Stupidity is, Genius has limits.
Posts: 1,225
Joined: Feb 15, 2011 13:26:31 GMT -5
|
Post by vwrick69 on Dec 25, 2012 17:39:02 GMT -5
I'm hoping to make this one, just to hang out and help.
|
|
vw1s
1600dp
I am Jack's Medulla Oblongata...
Posts: 1,841
Joined: Jun 25, 2008 5:16:14 GMT -5
|
Post by vw1s on Dec 25, 2012 20:58:04 GMT -5
Anybody attending that can do king pins? I have a friend who's Baja needs at least one side done. One thing I've never done on an ACVW (never had to, I've alway owned bj cars)
|
|
vwrick69
1600dp
The difference between Genius and Stupidity is, Genius has limits.
Posts: 1,225
Joined: Feb 15, 2011 13:26:31 GMT -5
|
Post by vwrick69 on Dec 26, 2012 7:03:09 GMT -5
Anybody attending that can do king pins? I have a friend who's Baja needs at least one side done. One thing I've never done on an ACVW (never had to, I've alway owned bj cars) I would like to see this also, the 62 pan is gonna need them replaced also. |
|
67type1
1600dp
Remembering the past.... liv'n the Dream
Posts: 666
Joined: Mar 18, 2011 19:05:44 GMT -5
|
Post by 67type1 on Dec 26, 2012 7:44:18 GMT -5
Haven't had to do King Pins either, but bring them along and I'm sure we can do them.
Looking forward to this!
|
|
Woulda been a cool one too.
