andy
25hp
Posts: 3
Joined: Jun 10, 2016 23:23:42 GMT -5
|
Post by andy on Jun 10, 2016 23:34:56 GMT -5
Hi. I'm new to this forum. The front and middle mounts for my clutch cable tube broke. The front cross member is trashed - completely broken off. The spot welds on the passenger side rusted out as water was getting in there. Continued use of the clutch caused the whole cross member to break off. Where can you buy a new one . I realize it's the pedal cluster mount as well and that pedal location is very important for the brakes. It's 1971 Superbeetle. I've got to get it on the road! I know there are various ways to "codge" it together but I want to do it right. I also have to find out where the waters getting in. I drilled two half inch holes at the lowest point for drainage. Thanks in advance for any help.
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Jun 12, 2016 5:53:17 GMT -5
Welkome Andy, I think your going to need a doner front end and just replace it? hard to tell without seeing it ,and I'm no welder
|
|