|
|
Post by thedirtydutchman on Jul 11, 2014 18:32:58 GMT -5
Along with every other stupid issue with this ol rail o mine one side of the rear suspension sits lower than the other. Its an irs set up. What all do I need to take off to change the settings on the bars? Sorry for all my constant annoying questions.....
|
|
Deleted
Posts: 0
Joined: Nov 26, 2024 18:04:47 GMT -5
|
Post by Deleted on Jul 11, 2014 22:39:43 GMT -5
On a swing you unbolt the axle tube from the spring plate, pull the torsion cap, chain the chassis to the jack and double check the chain around the chassis and jack!!!!!! lift the plate up using the jack and with a screw driver release the jack and slip the spring plate over/past the lower stop on the torsion until it is relaxed and then remove the spring plate and turn it 1 spline either up or down to get the ride height you want. Then do the reverse to reassemble and ride ride ride.
|
|
|
|
Post by thedirtydutchman on Jul 12, 2014 7:28:05 GMT -5
Thats kinda what I thought. Ill get to that soon hopefully! Drives me nuts. Now, should I go up with one side to match or down with the other....
|
|
vw1s
1600dp
I am Jack's Medulla Oblongata...
Posts: 1,841
Joined: Jun 25, 2008 5:16:14 GMT -5
|
Post by vw1s on Jul 12, 2014 7:48:10 GMT -5
The rear torsion bars are splined differently on each end. You may need to go up one notch on the outer and down two on the inner. Or down two on the outer and up one on the inner. Or, any other of many possible combinations. I've found, it's best to take BOTH spring plates off the stops, then, using an angle finder, match one side to the other.
|
|
|
|
Post by thedirtydutchman on Jul 12, 2014 10:14:28 GMT -5
Well geez, now ya make it sound all complicated! Hahaha. I will do some more research and take it apart this winter. Thanks Patrick
|
|
clintonddk
1600dp
Posts: 755
Joined: Oct 7, 2008 18:16:45 GMT -5
|
Post by clintonddk on Jul 12, 2014 15:51:21 GMT -5
You don't have a bad shock do ya?
|
|
|
|
Post by thedirtydutchman on Jul 12, 2014 16:42:28 GMT -5
It has air shocks on it. I tried adjusting them and it didn't help. I let all the air out and they were still uneven.
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Jul 13, 2014 7:50:29 GMT -5
|
|
|
|
Post by thedirtydutchman on Jul 13, 2014 8:38:16 GMT -5
Lol! The lower part is the drivers side so im sure when people are behind me they are thinking im to big for it!
|
|
