mhowe
25hp
Posts: 5
Joined: Jun 20, 2012 22:26:52 GMT -5
|
Post by mhowe on Jun 20, 2012 22:29:27 GMT -5
67 bug engine. #2 cylinder not making exhaust tube hot. Need to get compression tester to check it out. Just had engine apart to reseal crank case. Just south of Burnips MI.
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Jun 21, 2012 6:47:46 GMT -5
If the valves are adjusted? try swapping #2 plug wire with another,check the plug to make sure it's not fouled? No comp tester? try the hillbilly method ;D pull all the plugs, stick your finger over plug hole and have somebody turn it over,should blow ur finger away from hole ;D all cyl's should be about the same also check for an intake leak on that side, If ur running dual webers or Dells can be a plugged idle jet?could be something simple like the Timing off,,,MadMike
|
|
teamafx
1600dp
I am in group #1
Posts: 1,341
Joined: May 29, 2010 15:33:28 GMT -5
|
Post by teamafx on Jun 23, 2012 21:28:04 GMT -5
Any luck checking it out? Whats going on with it?
|
|
