nvsbandit
25hp
Posts: 8
Joined: Oct 12, 2009 19:32:46 GMT -5
|
Post by nvsbandit on Oct 17, 2009 13:35:15 GMT -5
|
|
|
|
Post by Dustin on Oct 18, 2009 2:19:45 GMT -5
That bus used to belong to Drew from MIVE didn't it?
|
|
nvsbandit
25hp
Posts: 8
Joined: Oct 12, 2009 19:32:46 GMT -5
|
Post by nvsbandit on Oct 18, 2009 9:52:44 GMT -5
yes it did belog to drew but i dont really wanna talk about it.  kinda got shafted on the deal but its my problem now.  he wont talk to me now to tell me all what needed to be done so im just gonna dive into it and hope to get it right. i think my oil cooler seal is leaking like crazy (not just drips like a full on stream) and i was told by someone that knows him the rear main was replaced but i dont think it has been judging by the rate oil pours out when the engine is under pressure. |
|
fastwagens
40hp
Posts: 76
Joined: Aug 31, 2009 16:27:29 GMT -5
|
Post by fastwagens on Oct 18, 2009 18:36:49 GMT -5
Well I know Drew also And I will vouch for the fact that he did indeed put in a new oil cooler seal, rear main, he also replaced the airflow meter and some exhuast pieces. so if you are having issues now it is not that he lied it is just there may be a bigger underlying issue that is causing this van problems. This also was his daily driver for a job that required him to drive all over the state and he did this for over a year. yes it did belog to drew but i dont really wanna talk about it. kinda got shafted on the deal but its my problem now. he wont talk to me now to tell me all what needed to be done so im just gonna dive into it and hope to get it right. i think my oil cooler seal is leaking like crazy (not just drips like a full on stream) and i was told by someone that knows him the rear main was replaced but i dont think it has been judging by the rate oil pours out when the engine is under pressure. |
|
nvsbandit
25hp
Posts: 8
Joined: Oct 12, 2009 19:32:46 GMT -5
|
Post by nvsbandit on Oct 18, 2009 20:27:15 GMT -5
i never called drew a liar, and no drama here please. if you feel strongly about it please send me a PM.
im not out to talk bad about drew hes a good guy. i just want to know whats going on with this thing. when it ran it had a high idle of about 3k rpm and now it leaks oil....thats not to bad but i have pretty bad oil blow by.
|
|
nvsbandit
25hp
Posts: 8
Joined: Oct 12, 2009 19:32:46 GMT -5
|
Post by nvsbandit on Oct 18, 2009 21:44:49 GMT -5
update in the story...after researching i think my piston rings might be all nutsty...which is gonna be a total pain in the butt.
|
|
nvsbandit
25hp
Posts: 8
Joined: Oct 12, 2009 19:32:46 GMT -5
|
Post by nvsbandit on Nov 3, 2009 6:47:55 GMT -5
so last night as i was showing my buddy this thing the sliding door falls right off into my yard. luckily the glass and everything stayed in tact the next hour was consumed by getting this thing to roll properly (which is now does thanks to some wd40 and lithium grease.)
still havent even checked out the leak yet...not enough time in a day i tell ya.
|
|
nvsbandit
25hp
Posts: 8
Joined: Oct 12, 2009 19:32:46 GMT -5
|
Post by nvsbandit on Nov 3, 2009 6:48:19 GMT -5
and i have a completely flat tire.....haha
|
|
Southpaw
1600dp
The Green Tin Can
Posts: 1,521
Joined: Sept 9, 2008 5:56:22 GMT -5
|
Post by Southpaw on Nov 3, 2009 9:12:45 GMT -5
Just fit one thing @ a time , It will all come together .
|
|
|
|
Post by ghiastein on Nov 3, 2009 9:17:25 GMT -5
I remember the countless time that my slider door has almost fallen off from my first. Rusty slider tracks are not fun.
|
|
