|
|
Post by ladyoftheflowers on Jul 29, 2008 11:13:43 GMT -5
I spent 3 hours last night trying to figure out my wiring system. The end result, I now have brake lights, emergency flashers, and every tail light except the back passenger side. But what I really need is turn signals! Fuses keep popping everytime we replace them which leads us to think something is hooked up wrong. My eyes were crossing by 9:30 so we called it a night. Anyone have any suggestions on where to start with this?
|
|
|
|
Post by bren on Jul 29, 2008 12:06:21 GMT -5
Do you have a wiring diagram for you car?
|
|
|
|
Post by ghiastein on Jul 29, 2008 12:40:39 GMT -5
Defiantly start with the wiring diagram but popping fuses is a sign of high current draw aka a short. Some where a wire could be touching the metal body. The first place that I would check is the wiring connector in the trunk. Where the wire harness from the steering column comes up. It should have 4 wires in and 4 wires out. The wire colors going into the connector should be black/white and black/green. Check for loose wires there or a crossed connection. Also fully check you wires for signs of chaffing especially around where the wires run through holes in the body. If you do need the wire diagram for your car let me know I can email it to you.
|
|
Chris
1500sp
Posts: 330
Joined: Jun 24, 2008 20:48:27 GMT -5
|
Post by Chris on Jul 29, 2008 12:57:07 GMT -5
Providing everything is wired correctly in your car, this should do  |
|
