Chris
1500sp
Posts: 330
Joined: Jun 24, 2008 20:48:27 GMT -5
|
Tap
Jul 24, 2008 20:08:06 GMT -5
Post by Chris on Jul 24, 2008 20:08:06 GMT -5
Does anyone have an M14-2.0 metric course thread tap? I really need one for my case inserts. Please let me know.
|
|
Southpaw
1600dp
The Green Tin Can
Posts: 1,521
Joined: Sept 9, 2008 5:56:22 GMT -5
|
Tap
Jul 25, 2008 5:53:52 GMT -5
Post by Southpaw on Jul 25, 2008 5:53:52 GMT -5
Ya I got one , Are you just chasing or tapping a welded hole .
|
|
Chris
1500sp
Posts: 330
Joined: Jun 24, 2008 20:48:27 GMT -5
|
Tap
Jul 25, 2008 10:58:42 GMT -5
Post by Chris on Jul 25, 2008 10:58:42 GMT -5
Im tapping a hole in my block for a case saver. Are the taps availiable at most places? If so, there is no point in borrowing on if you can just buy one. I do appreciate the offer though
|
|
|
Tap
Jul 27, 2008 20:57:00 GMT -5
Post by bren on Jul 27, 2008 20:57:00 GMT -5
Chris: Hubbard supply on Dickman, just east of Hill Brady, carries taps and dies. If they don't have the one you need they can usually get it fast. -Bren
|
|
Chris
1500sp
Posts: 330
Joined: Jun 24, 2008 20:48:27 GMT -5
|
Tap
Jul 27, 2008 21:18:50 GMT -5
Post by Chris on Jul 27, 2008 21:18:50 GMT -5
Napa in kalamazoo has me one coming in tommorow. I do appreciate the input though. Thanks Bren
|
|