poomwah
1600dp
Posts: 559
Joined: Aug 8, 2011 4:47:08 GMT -5
|
Post by poomwah on Jun 28, 2013 10:13:41 GMT -5
I got a one piece front end for my 75 yesterday. Thanks again Rick!! Well, I have NO idea how to make this fit. Here are some pics... Any suggestions?   any ideas would be greatly appreciated, thanks guys |
|
vw1s
1600dp
I am Jack's Medulla Oblongata...
Posts: 1,841
Joined: Jun 25, 2008 5:16:14 GMT -5
|
Post by vw1s on Jun 28, 2013 11:19:46 GMT -5
It looks like, if you pull the back bottom corners down and in, the back top corners will pull down and line up. You will probably have to do some trimming to fit at the cowl and a pillars. Don't trim anything until you are sure! Do you have a tilt mount for it?
|
|
poomwah
1600dp
Posts: 559
Joined: Aug 8, 2011 4:47:08 GMT -5
|
Post by poomwah on Jun 28, 2013 12:18:20 GMT -5
no tilt yet. still need to fab one up. I tried pushing. well pulling the bottom in.ran a strap under the pan from one side to the other. with the bottom touching the body the top still has that gap
|
|
poomwah
1600dp
Posts: 559
Joined: Aug 8, 2011 4:47:08 GMT -5
|
Post by poomwah on Jun 28, 2013 12:57:04 GMT -5
maybe I could do it wide body style.... make some stand offs for the bottom that would make the opening the same width all the way up and down...then dress up the edges of the opening and use them as air outlets to let some of the air out from under the front end.
|
|
poomwah
1600dp
Posts: 559
Joined: Aug 8, 2011 4:47:08 GMT -5
|
Post by poomwah on Jun 28, 2013 13:10:00 GMT -5
something like this perhaps, maybe put a piece of mesh in the opening  |
|
