|
|
Post by dunedudex4 on Jan 17, 2013 6:21:56 GMT -5
I have a line on a pan and title 1969 in good shape. Unless you can talk me out of it I think that will be the route we will go. Cause if I can drop my 67 off at your house with my jigs and 400 or less I don't think you could buy new thick pans cut the old ones out and weld the new ones in along with the work for the IRS pivot pockets?! Or could you??!!.. Larry's has them listed at 120.00 each= 240.00 so that only leaves 160.00 for the rest of the work..
|
|
Dunn Fabrication ( VDub63 )
40hp
Steven A.k.a Vdub63 "Your project isn't finished until it is DUNN"
Posts: 50 
Joined: Jul 6, 2012 22:11:43 GMT -5
|
Post by Dunn Fabrication ( VDub63 ) on Jan 17, 2013 6:48:17 GMT -5
 Is this meant to be in a pm? |
|
vwrick69
1600dp
The difference between Genius and Stupidity is, Genius has limits.
Posts: 1,225
Joined: Feb 15, 2011 13:26:31 GMT -5
|
Post by vwrick69 on Jan 17, 2013 8:20:44 GMT -5
I did the same thing for the 65 I have. Pan { floors in good shape} with title cost exactly the same as lawyer to get title issue cleaned up , and I still would have to repair floors on 65.
|
|
|
|
Post by dunedudex4 on Jan 17, 2013 15:43:32 GMT -5
Nope no pm's just throwing it out there. As much fun as it would be to do the work, I have to be realistic and know that if I want this project done I will have to take the easier way out.
|
|
Dunn Fabrication ( VDub63 )
40hp
Steven A.k.a Vdub63 "Your project isn't finished until it is DUNN"
Posts: 50
Joined: Jul 6, 2012 22:11:43 GMT -5
|
Post by Dunn Fabrication ( VDub63 ) on Jan 17, 2013 16:51:24 GMT -5
Larry's has them listed at 120.00 each Have you checked with Randy Townsend? To see what his prices are? |
|
Is this meant to be in a pm?