jallen
25hp
Posts: 21
Joined: Jul 23, 2014 17:38:29 GMT -5
|
Post by jallen on Aug 9, 2014 7:41:55 GMT -5
Hey guys, I'm getting ready to put a 2332 in my 64 beetle. It has 48 IDA's with the tall intakes. The more I look and measure the more I'm starting to think its not going to fit. Whats my best option here? Will the tall intakes fit but are just really tight? Or do I need to get some short intakes? Gene Berg sells a set that are 4 3/8 tall, are there any others that'll work? Does anyone have a pair they'd like to sell?
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Aug 10, 2014 8:16:44 GMT -5
Hey Jerry,Like I said,,Scat Trax,, and use stand off's on the deck lid for clearance Attachments:
|
|
jallen
25hp
Posts: 21
Joined: Jul 23, 2014 17:38:29 GMT -5
|
Post by jallen on Aug 10, 2014 9:55:29 GMT -5
I haven't had any luck finding the skat traks. The berg manifolds I found seem to be quite a bit shorter than the ones I have, I was hoping someone had some experience with them. Madmike, why don't you just send me the set you have to "borrow".
|
|
|
Post by bren on Aug 10, 2014 11:21:34 GMT -5
|
|
|
Post by bren on Aug 10, 2014 11:27:47 GMT -5
|
|
clintonddk
1600dp
Posts: 755
Joined: Oct 7, 2008 18:16:45 GMT -5
|
Post by clintonddk on Aug 10, 2014 12:17:38 GMT -5
I've heard of some people milling the manifolds so they tilt in towards the fan shroud.
|
|
jallen
25hp
Posts: 21
Joined: Jul 23, 2014 17:38:29 GMT -5
|
Post by jallen on Aug 10, 2014 18:35:55 GMT -5
I'll give cbperformance and Gene Berg a call tomorrow and figure something out.
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Aug 11, 2014 5:59:25 GMT -5
Hey Jerry,I would loan them ,,but they aren't mine Maybe someone over on STF will /did this and can offer advice?
|
|
jallen
25hp
Posts: 21
Joined: Jul 23, 2014 17:38:29 GMT -5
|
Post by jallen on Aug 11, 2014 20:10:11 GMT -5
I know Mike, I was just giving you a hard time.... Talked to someone at Gene Berg today and they got me hooked up with a set of short manifolds, so as of right now I think I got it figured out....I think....
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Aug 12, 2014 7:28:59 GMT -5
Cool ,Just be sure to 'Match port' them to the head, u can use the gasket as a templet
|
|
jallen
25hp
Posts: 21
Joined: Jul 23, 2014 17:38:29 GMT -5
|
Post by jallen on Aug 12, 2014 19:09:36 GMT -5
Gotcha Mike...just open them up with a dremel tool if needed?
|
|
MadMike
1600dp
Posts: 3,277
Joined: Oct 30, 2008 10:21:12 GMT -5
|
Post by MadMike on Aug 13, 2014 6:57:53 GMT -5
Yepper,That will work,just takes longer then a porting tool,so take ur time and do a good job
|
|
jallen
25hp
Posts: 21
Joined: Jul 23, 2014 17:38:29 GMT -5
|
Post by jallen on Aug 17, 2014 18:54:26 GMT -5
Got my manifolds this weekend. The ports are way different, I'm going to have to remove a lot of material. This is my first time and its gonna be a nerve racking.
|
|
|
Post by bren on Aug 17, 2014 19:43:36 GMT -5
Pictures? How about of the car too? Quit teasing us....
|
|